AFMO will email you a measurement form with your order confirmation. Please return as soon as possible with your measurements. Please contact us at firstname.lastname@example.org or 1-800-282-3327 for details.
The GH Talon series offers NIJ Type 1, 2 and 3 protection against edged and spike threats. Utilizing trusted Kevlar Correctional materials, the Talon series provides enhanced protection for correctional duties.
- Valued combination of weight and affordability
- Kevlar Correction material
- Complies with NIJ 0115.00 Standard
- Polycotton carrier lined with Akwadyne Coolmesh material for added comfort
- Water resistant ballistic panel cover
- Removable 5" x 8" soft trauma plate
- 4-point or 6-point fastening system
- Available in Male & Female styles
Talon 1: NIJ Spike 1: 0.31 psf 0.076"
Talon 2: NIJ Spike 2: 0.46 psf 0.134"
Talon 3: NIJ Spike 3: 0.58 psf 0.18"
|Specifications|| || || |
|Protection Level||Level 1||Level 2||Level 3|
|Country of Certifications||USA||USA||USA|
|Certification Standard||NIJ 0115.00||NIJ 0115.00||NIJ 0115.00|
|Areal Density||0.31 lb/ftï¿½||0.46 lb/ftï¿½||0.58 lb/ftï¿½|
|Thinness||0.08 in.||0.12 in.||0.15 in.|
|Composition||100% Kevlar Correctional||100% Kevlar Correctional||100% Kevlar Correctional|
|Stitching||Shoulder Tack||Shoulder Tack||Shoulder Tack|
|Panel over||200 denier Nylon Cover, Polyurethane Backed||200 denier Nylon Cover, Polyurethane Backed||200 denier Nylon Cover, Polyurethane Backed|
| ||Ultrasonic Welded Seams||Ultrasonic Welded Seams||Ultrasonic Welded Seams|
|Spike Resistance Rating||17.7 ft-lbs (24 joules)||24.3 ft-lbs (33 joules)||31.7 ft-lbs (43 joules)|
||.9mm; .40 S&W
||This armor protects against 9 mm FMJ RN bullets with
a specified mass of 8.0 g (124 gr) and a velocity of 355 m/s ï¿½ 9.1 m/s (1165 ft/s ï¿½ 30 ft/s) and
with .40 S&W FMJ bullets with a specified mass of 11.7 g (180 gr) and a velocity of 325 m/s ï¿½
9.1 m/s (1065 ft/s ï¿½ 30 ft/s).
It also provides protection against most
other .25 and .32 caliber handgun rounds. Type I body armor is light. This is the minimum level of protection every officer should have,
and the armor should be routinely worn at all times while on duty.
Most agencies today, however,
because of increasing threats, opt for a higher level of protection.
| Type II
||.357 Magnum; 9mm||This armor protects against 9 mm FMJ RN bullets with a
specified mass of 8.0 g (124 gr) and a velocity of 379 m/s ï¿½9.1 m/s (1245 ft/s ï¿½ 30 ft/s) and with
.357 Magnum JSP bullets with a specified mass of 10.2 g (158 gr) and a velocity of 408 m/s ï¿½9.1
m/s (1340 ft/s ï¿½ 30 ft/s). It also provides protection
against such threats as .45 Auto., .38 Special +P, and some other factory loads in caliber
.357 Magnum and 9mm, as well as the Type I threats.
Type IIï¿½A body armor is well suited for full-time use by police departments, particularly those
seeking protection for their officers from lower velocity .357 Magnum and 9mm ammunition.
| Type IIIï¿½A||.44 Magnum, .357 SIG
||This armor protects against.357 SIG FMJ FN bullets
with a specified mass of 8.1 g (125 gr) and a velocity of 430 m/s ï¿½ 9.1 m/s (1410 ft/s ï¿½ 30 ft/s)
and with .44 Magnum SJHP bullets with a specified mass of 15.6 g (240 gr) and a velocity of
408 m/s ï¿½ 9.1 m/s (1340 ft/s ï¿½ 30 ft/s).It also provides
protection against most handgun threats, as well as the Type I, IIï¿½A, and II threats.
Type IIIï¿½A body armor provides the highest level of protection currently available from concealable
body armor and is generally suitable for routine wear in many situations.
|Type III||high-powered rifle, .762mm., 5.56mm., 12-gauge
||This armor, normally of hard or semirigid construction, protects
against 7.62mm full-metal jacketed bullets (U.S. military designation M80), with nominal masses
of 9.7 g(150 gr), impacting at a velocity of 838 m/s(2,750 ft/s) or less. It also provides protection
against threats such as 223 Remington (5.56mm FMJ), 30 Carbine FMJ, and 12-gauge
rifled slug, as well as the Type I through IIIï¿½A threats.
Type III body armor is clearly intended only for tactical situations when the threat warrants
such protection, such as barricade confrontations involving sporting rifles.
|Type IV|| .30ï¿½06 caliber armor-piercing bullets
||This armor protects against .30 caliber AP bullets (U.S. Military designation M2 AP) with a specified mass of 10.8 g
(166 gr) and a velocity of 878 m/s ï¿½ 9.1 m/s (2880 ft/s ï¿½ 30 ft/s). It also provides at least single-hit protection against the
Type I through III threats.
Type IV body armor provides the highest level of protection currently available. Because this
armor is intended to resist ï¿½armor piercingï¿½ bullets, it often uses ceramic materials. Such materials
are brittle in nature and may provide only single-shot protection, since the ceramic tends to
break up when struck. As with Type III armor, Type IV armor is clearly intended only for tactical
situations when the threat warrants such protection.
NO armor is ever 100% ï¿½bulletproofï¿½ under ALL conceivable circumstances.
*Please consult the latest NIJ Standards-0101.06