 |
 |
 |
|
Brightness Controllable
Our high intensity lights are capable of producing very powerful illumination. Therefore, having brightness control feature in such powerful light can be very useful. Switching brightness from high to low setting prevents saturating eye sight when reading maps and conducting other close range tasks. In this process, battery life is extended as well.
This year, we are introducing three new models with brightness control feature: LB2, XB2, and XB3.
Turn the tail-cap to set the light at low setting. Press the tail button at anytime for switching on at high setting. Eighter the low setting or the high setting can be switched on to constant. Whether the light is off or at low setting, the light at high setting is always and instantly available by pressing the tail button without having to change mode first or cycle through different settings.
LED lights are getting brighter and brighter as newer LED's are available now. With brightness control feature, LB2 is one step above our most popular L2 LED Light.
Xenon lights have hot, powerful beam that travels further than LED lights. It can also attach an IR filter for infrared illumination that LED lacks. However, in order to generate such intense light output, the runtime is rather limited. Our XB2 and XB3 lights are capable of setting light at low to to save power for conducting close range tasks.
Key Advantages
1. Instantly switch on at high setting whether the light is switched off or at low setting without having to change mode or cycling through settings.
2. Capable of switching on and staying on constant at low setting or at high setting. Useful for doing close range tasks with low constant on.
3. Xenon lights with low setting, giving a new meaning and a new life to lights capable of reaching longer distance and with IR capability.
4. Interchangeable xenon and LED head, so you will not be stuck with just a LED brightness control light.
LB2 Features
A brightness controllable LED light, LB2 can be set at high or at low light output. At low setting, LB2 produces 20 lumens of light, sufficient for map reading. At anytime, LB2 can produce up to 100 lumens of powerful light>
Protected Tail:
The rubber tail button of XB3 is protected from accidental switch on. It also allows XB3 to stand vertically on a suface
Brightness Control:
For all three models, turn the tail-cap to set the light at low setting, but press the tail button at anytime for maximal brightness at high setting
Interchangeable Head:
The heads are easily interchangeable for alternate light sources, including UV, IR, Xenon, or LED light, maximizing your initial investment for future needs.
1.25" Bezel Head
Factory maximal focused, aluminum reflector for best heat dissipation and textured for smooth beam output.
Replaceable Glass Lens
Tempered glass lens for optimal light transmission, but can be replaced easily if cracked or shattered from an unexpected front impact
High Power LED
LB2 features a high power LED as the light source for the purest and the most intensified white beam
3-Battery Compartment
XB3 holds three CR123A batteries for powering a g-volt xenon lamp for high intensity output
Double O-Ring Seal
Two o-rings in all seals for both models as redundant protection against water leakage with pressure to at least one atmosphere high
1.5" Bezel Head
Supersized and factory maximl focused, aluminum reflector for best heat dissipation and textured for smooth beam output
Removable Metal Clip
The metal clip is rough and rugged, made from a solid piece of metal that can be removed easily if the light is to be carried in a holster.
"Built-like-a-Tank"
Bezel of light is shock isolated with battery compartmentalization, the head and tail-cap are interchangeable with our weapon light systems, essentially serve as a the "functional backups"
Mil-Spec Type III Exterior
Anti-abrasive, anti-corrosive, and anti-reflective hard anodized exterior finish complying to Type III Military Specification olive drab for the toughest environments.
Specifications:
HIGH SETTING
Brightness: Max 100 Lumens
Run-Time: 90 Minutes (Peak), 3 Hours (Usable)
LOW SETTING
Brightness: 20 Lumens
Run-Time: 10 Hours
Batteries: Two CR123A Lithium
Lamp: High Power LED
Tail-Cap: TC6
Bezel Size: 1.25" (31.75 mm)
Length: 5.5" (140 mm)
Weight: 5.2 oz. (147 grams) |
|
|
|
|
|
|
|
|
