AFMO will email you a measurement form with your order confirmation. Please return as soon as possible with your measurements. Please contact us at firstname.lastname@example.org or 1-800-282-3327 for details.
Click Here: Bullet Proof Partnership Program - BVP Funding
GH LITE-X II - Includes two concealable carriers and one trauma plate
The new NIJ Standard-0101.06 is designed to do one thing ï¿½ protect you against an ever-increasing range of threats. The GH LITEX series of vests provides superior protection, increased trauma performance and the extreme reliability and durability required by the rigorous new standard. The GH LITEX meets and exceeds all of the tougher benchmarks including higher shot velocities and quantities, shot placement, extended immersion and environmental testing and angle of incidence. What does this mean to you? A comfortable, durable vest that protects like never before.
Concealable Oversize Charges: - 2XL - 5XL - ADD $150.00
- Certified to NIJ Standard-0101.06
- Hybrid designs featuring Twaron, Goldflex, Kevlar XP and XLT for greater comfort and flexibility
- Available in male and female, including GHï¿½s true female 3-piece design
- GHï¿½s exclusively patented ProTectTM internal ballistic desiccant system with increased moisture management for durability of performance
- Water-resistant ballistic panel cover with heat-sealed seams for extra protection
- Poly-cotton carrier lined with moisture-wicking fabric for coolness and comfort
- Carrier accepts 5x8"" and 8x10"" soft, hard, or special threat trauma plates for total configurability
- 6-point, 4-point, or Hybrid strap fastening systems
||.9mm; .40 S&W
||This armor protects against 9 mm FMJ RN bullets with
a specified mass of 8.0 g (124 gr) and a velocity of 355 m/s ï¿½ 9.1 m/s (1165 ft/s ï¿½ 30 ft/s) and
with .40 S&W FMJ bullets with a specified mass of 11.7 g (180 gr) and a velocity of 325 m/s ï¿½
9.1 m/s (1065 ft/s ï¿½ 30 ft/s).
It also provides protection against most
other .25 and .32 caliber handgun rounds. Type I body armor is light. This is the minimum level of protection every officer should have,
and the armor should be routinely worn at all times while on duty.
Most agencies today, however,
because of increasing threats, opt for a higher level of protection.
| Type II
||.357 Magnum; 9mm||This armor protects against 9 mm FMJ RN bullets with a
specified mass of 8.0 g (124 gr) and a velocity of 379 m/s ï¿½9.1 m/s (1245 ft/s ï¿½ 30 ft/s) and with
.357 Magnum JSP bullets with a specified mass of 10.2 g (158 gr) and a velocity of 408 m/s ï¿½9.1
m/s (1340 ft/s ï¿½ 30 ft/s). It also provides protection
against such threats as .45 Auto., .38 Special +P, and some other factory loads in caliber
.357 Magnum and 9mm, as well as the Type I threats.
Type IIï¿½A body armor is well suited for full-time use by police departments, particularly those
seeking protection for their officers from lower velocity .357 Magnum and 9mm ammunition.
| Type IIIï¿½A||.44 Magnum, .357 SIG
||This armor protects against.357 SIG FMJ FN bullets
with a specified mass of 8.1 g (125 gr) and a velocity of 430 m/s ï¿½ 9.1 m/s (1410 ft/s ï¿½ 30 ft/s)
and with .44 Magnum SJHP bullets with a specified mass of 15.6 g (240 gr) and a velocity of
408 m/s ï¿½ 9.1 m/s (1340 ft/s ï¿½ 30 ft/s).It also provides
protection against most handgun threats, as well as the Type I, IIï¿½A, and II threats.
Type IIIï¿½A body armor provides the highest level of protection currently available from concealable
body armor and is generally suitable for routine wear in many situations.
|Type III||high-powered rifle, .762mm., 5.56mm., 12-gauge
||This armor, normally of hard or semirigid construction, protects
against 7.62mm full-metal jacketed bullets (U.S. military designation M80), with nominal masses
of 9.7 g(150 gr), impacting at a velocity of 838 m/s(2,750 ft/s) or less. It also provides protection
against threats such as 223 Remington (5.56mm FMJ), 30 Carbine FMJ, and 12-gauge
rifled slug, as well as the Type I through IIIï¿½A threats.
Type III body armor is clearly intended only for tactical situations when the threat warrants
such protection, such as barricade confrontations involving sporting rifles.
|Type IV|| .30ï¿½06 caliber armor-piercing bullets
||This armor protects against .30 caliber AP bullets (U.S. Military designation M2 AP) with a specified mass of 10.8 g
(166 gr) and a velocity of 878 m/s ï¿½ 9.1 m/s (2880 ft/s ï¿½ 30 ft/s). It also provides at least single-hit protection against the
Type I through III threats.
Type IV body armor provides the highest level of protection currently available. Because this
armor is intended to resist ï¿½armor piercingï¿½ bullets, it often uses ceramic materials. Such materials
are brittle in nature and may provide only single-shot protection, since the ceramic tends to
break up when struck. As with Type III armor, Type IV armor is clearly intended only for tactical
situations when the threat warrants such protection.
NO armor is ever 100% ï¿½bulletproofï¿½ under ALL conceivable circumstances.
*Please consult the latest NIJ Standards-0101.06